不銹鋼材質材料1.4313是馬氏體級，耐被金屬氧化高朝，熱治理后耐久性性好。X3CrNiMo13-4鋼的機誡化機誡功效是因化學工業成分表中鉬和鎳的高含氧量。許多鋁合金放入劑局限性了加強級碳含氧量的必須 ——給定濃度值十分于奧氏體不銹鋼材質材料。雖說鎳含氧量不夠，但鎳含氧量約為4%，顯著性提供了鋼對很多被金屬氧化自然生態環境的減緩力——多次機誡化機誡功效。X3CrNiMo13-4鋼粉絲可生產達300℃在氣溫下崗位的器件和器件，或爆漏在很多被金屬氧化自然生態環境中的器件，一起長期保持任何的外觀情況括抗氯化物屬性)。QT650.QT780和QT900情況下，熱治理后最易完工矩形鋼。半產量設備使用煤層氣生產.化工品.在冶金機械和能源技術領域，鍋輪機爆漏在高清新高低溫下.泵.壓縮視頻機配件。鋼不適應合對焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50生產商EN1.4313馬氏體不銹鋼材質具備著去應力退火特征（+A）模式、高頻淬火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，想要哪某個千萬要跟行業說清晰哦。